Возврат к шагу #4
Отредактированно Adam O'Camb -
Правка одобрена автор Adam O'Camb
- До
- После
- Без изменений
Шаг Линий
| [* black] Remove the three screws securing the Taptic Engine. | |
| - | [* red] Two 2.8 mm |
| + | [* red] Two 2.8 mm ***standoff*** screws |
| [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit. | |
| [* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components. | |
| - | [* orange] One 1.6 mm |
| + | [* orange] One 1.6 mm Phillips screw |