Возврат к шагу #2
Отредактированно Spencer Day -
Правка одобрена автор Spencer Day
- До
- После
- Без изменений
Шаг Линий
| [* black] Use your fingers to pinch the locking tab in the center of the interconnect cable connector. | |
| [* black] While pinching the tab, insert the flat end of a spudger between the [link|https://guide-images.cdn.ifixit.com/igi/UkJVb2LqUUUEim1m.full|top of the socket and the connector's tab|new_window=true]. | |
| [* black] Twist the spudger to lift the connector out of its socket until the clip in the center [link|https://guide-images.cdn.ifixit.com/igi/EqeMsneOZHOsS2aL.full|disengages|new_window=true]. | |
| + | [* black] Use your fingers to pull the connector straight up and out of its socket. |
| + | [* icon_reminder] During reassembly, insert the interconnect cable connector into its socket and press down on both edges until the connector snaps into place. |