Возврат к шагу #5
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| + | [* icon_note] Follow the next two steps if you weren't able to pull all the stretch-release adhesives. |
|---|---|
| + | [* icon_caution] Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a fire. In case you're struggling to pull up the battery, apply more isopropyl alcohol and try again. |
| + | [* black] Apply a few drops of high concentration (over 90%) isopropyl alcohol to the gaps surrounding the affected area of the battery. |
| + | [* icon_caution] Be careful not to get an isopropyl alcohol near the speakers, as that will loosen them from the frame. |
| + | [* black] Wait between one to two minutes for the adhesive to loosen. |
Изображение 1
Нет предыдущего изображения
Добавлено
Изображение 2
Нет предыдущего изображения
Добавлено