Перейти к основному содержанию

Возврат к шагу #5

Отредактированно Alex Diaz-Kokaisl -

Правка одобрена автор Alex Diaz-Kokaisl

До
После
Без изменений

Шаг Линий

[* icon_note] Follow the next two steps if you weren't able to pull all the stretch-release adhesives.
[* icon_caution] Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a fire. In case you're struggling to pull up the battery, apply more isopropyl alcohol and try again.
-[* black] Apply a few drops of high concentration (over 90%) isopropyl alcohol to the gaps surrounding the battery edge.
+[* black] Apply a few drops of high concentration (over 90%) isopropyl alcohol to the gaps surrounding the affected area of the battery.
[* icon_caution] Be careful not to get an isopropyl alcohol near the speakers, as that will loosen them from the frame.
[* black] Wait between one to two minutes for the adhesive to loosen.