Возврат к шагу #1
Отредактированно Spencer Day -
Правка одобрена автор Spencer Day
- До
- После
- Без изменений
Шаг Линий
| [title] Unfasten the MagSafe port | |
| - | [* red] Use a 2IP Torx Plus driver to ***loosen*** the two set screws |
| - | [* icon_note] |
| + | [* red] Use a 2IP Torx Plus driver to ***loosen*** (don't remove) the two MagSafe Port set screws a few turns above the frame. |
| + | [* icon_note] In a pinch, you can use a standard T2 Torx driver to loosen these screws. Make sure to apply constant, downward force to prevent stripping. |
| [* orange] Use your T5 Torx driver to remove the two 2.7 mm-long screws securing the MagSafe port. | |
| [* icon_note] These screws are not magnetic—be careful not to lose them. |