Возврат к шагу #4
Отредактированно Clay Eickemeyer -
Правка одобрена автор Clay Eickemeyer
- До
- После
- Без изменений
Шаг Линий
| [title] Insert an opening pick | |
| - | [* black] Insert wisdom here. |
| + | [* black] Use a [guide|157348|hair dryer|new_window=true] or [guide|151116|heat gun|new_window=true] to heat the bottom edge of the screen until it's hot to the touch. |
| + | [* icon_caution] Be careful not to heat the phone hotter than this—the battery is susceptible to heat damage. |
| + | [* black] Wait up to a minute for the adhesive to separate and a gap to form between the screen and the frame. |
| + | [* icon_note] If a gap doesn't appear after a minute, apply more heat and rotate the handle a quarter turn. Let the Anti-Clamp and time do the work for you. |
| + | [* black] Insert an opening pick into the gap. |
| + | [* black] Remove the Anti-Clamp using the pull tabs on the suction cups. |
| + | [* black] ***Skip the next two steps.*** |