Возврат к шагу #4
Отредактированно Clay Eickemeyer -
Правка одобрена автор Clay Eickemeyer
- До
- После
- Без изменений
Шаг Линий
| [title] Separate the antenna cable adhesive | |
| - | [* black] Hold the two cables you just freed up and out of the way of the middle press connector cable. |
| - | [* black] Insert the tip of an opening pick between the remaining cable and [link|https://guide-images.cdn.ifixit.com/igi/6CXPeMld12OnoFlw.huge|the adhesive securing it to its adjacent cable|new_window=true] to separate them. |
| + | [* icon_note] The cable for the middle press connector is adhered to an adjacent cable along the top edge of the battery. In this step, you'll separate this adhesive. |
| + | [* black] Hold the two cables you just freed out of the way of the middle press connector cable. |
| + | [* black] Insert the tip of an opening pick between the middle press connector cable and [link|https://guide-images.cdn.ifixit.com/igi/6CXPeMld12OnoFlw.huge|the adhesive securing it to its adjacent cable|new_window=true] to separate them. |