Перейти к основному содержанию

Возврат к шагу #1

Отредактированно Spencer Day -

Правка одобрена автор Spencer Day

До
После
Без изменений

Шаг Линий

[title] Unfasten the back cover
[* icon_note] Throughout this repair, [product|IF145-491|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from.
-[* red] Use a Phillips screwdriver to remove the five 17.2 mm‑long screws securing the top edge and bottom corners of the back cover.
-[* orange] Use a Phillips screwdriver to ''fully loosen'' the remaining captive screw at the center of the bottom edge. This should create a small gap between the back cover and chassis.
+[* red] Use a Phillips #0 screwdriver to remove the five 17.2 mm‑long screws securing the top edge and bottom corners of the back cover.
+[* orange] Use a Phillips #0 screwdriver to ''fully loosen'' the remaining captive screw at the center of the bottom edge. This should create a small gap between the back cover and chassis.
[* icon_caution] Don't try to remove this screw.