Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Olly -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Disconnect the LCD thermal sensor cable connector from its socket on the logic board.
-[* black] Carefully pull the display toward the top edge of your iMac and lift it out of the outer case, minding any cables that may get caught.
+[* black] NOTE: Do not simply tug on the cables to remove the plug! Use a nylon stick to gently wiggle the plug from the socket