Изменения в этом шаге
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Use tweezers, or your fingers, to lift the screen connector cover at a slight angle to unhook it from its slot in the logic board. |
| + | [* black] Lift the cover out of its slot and remove it. |
| + | [* icon_reminder] During reassembly, insert the cover at a slight downward angle to re-engage the hook before laying it flat against the press connector. |