Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Возврат к шагу #19

Отредактированно Spencer Pennington -

Правка одобрена автор Spencer Pennington

До
После
Без изменений

Шаг Линий

-[* black] To help the adhesive bond, apply heat to the edges of the rear glass using an [guide|11677|iOpener|new_window=true], [guide|157348|hair dryer|new_window=true], or [guide|151116|heat gun|new_window=true] until it's hot to the touch.
-[* black] Firmly press around the perimeter of the rear glass.
-[* black] If you have [guide|142291|screen vise clamps|new_window=true], use them to strengthen the bond of your new adhesive. If not, keep reading for more ways to secure the rear glass.
+[title] Heat the back glass
+[* black] To help the adhesive bond, apply heat to the edges of the back glass using an [guide|11677|iOpener|new_window=true], [guide|157348|hair dryer|new_window=true], or [guide|151116|heat gun|new_window=true] until it's hot to the touch.
+[* black] Firmly press around the perimeter of the back glass.
+[* black] If you have [guide|142291|screen vise clamps|new_window=true], use them to strengthen the bond of your new adhesive. If not, keep reading for more ways to secure the back glass.