Возврат к шагу #1
Отредактированно Spencer Pennington -
Правка одобрена автор Spencer Pennington
- До
- После
- Без изменений
Шаг Линий
| [title] Remove the screen adhesive | |
| [* icon_caution] Be careful not to damage any of the [link|https://guide-images.cdn.ifixit.com/igi/iDbDxdvYPgYRhqPQ.full|spring contacts|new_window=true] as you clean the frame. | |
| + | [* icon_note] This is a good point to test your repair before sealing up your phone. Connect the screen, power on your phone, and make sure it works as expected. Power it back down, disconnect the battery and back glass, and continue reassembly. |
| + | [* icon_note] The adhesive remaining on your phone is difficult to remove and leaves residue. If you have trouble removing the adhesive, apply some heat using a [guide|157348|hair dryer|new_window=true] or [guide|151116|heat gun|new_window=true]. |
| [* black] Use a spudger to push the screen adhesive up until you can grab it with a pair of tweezers. | |
| [* black] Use a pair of tweezers to remove the adhesive around the entire perimeter of the iPhone. |