Возврат к шагу #1
Отредактированно teenage engineering -
Правка одобрена автор teenage engineering
- До
- После
- Без изменений
Шаг Линий
| [* black] ***Remove Back Panel*** | |
| - | [* black] Open the Back Panel by carefully inserting |
| + | [* black] Open the Back Panel by carefully inserting a Spudger or similar on the side of the panel. Be careful not to damage the OP-1 coating. |
| [* black] Lift the Back Panel and remove it. The Connector Board is revealed. |