Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Возврат к шагу #10

Отредактированно Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

-[* black] When you remove the logic board, a small metal plate will be free to fall out of the rear case.
+[* black] At this point, a small metal plate near the rear facing camera is loose and may come free from its recess.
[* icon_note] Because it is very small and easy to lose, it's best to remove this plate and set it aside while you continue to work on your phone.
[* black] Use tweezers to remove the plate from beneath the bracket to the left of the rear-facing camera.
[* icon_reminder] When reassembling, orient the plate with the small tab to the right and the longest flat edge against the top of the phone.