Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #16

Редактировать с помощью Evan Noronha -

Правка одобрена автор Evan Noronha

До
После
Без изменений

Шаг Линий

[* black] Use the flat end of a spudger to disconnect the headphone jack connector from the logic board.
[* icon_caution] Pry up only on the connector—'''not''' on the socket itself.
[* icon_note] Newer iPad units have a loop of tape connecting this connector to its socket on the the logic board. This tape must be cut in order to disconnect the headphone jack.
[* black] Fold the headphone jack cable out of the way.