История iPad Air Wi-Fi Logic Board Replacement Шага #24

	[* icon_note] As you complete the next few steps, prying adhesive securing the logic board in place, always start by testing gently to see if the adhesive is softened. If not, reheat the iOpener and reapply it to the back of the rear case.
-	[* black] Carefully insert ~~a guitar~~ pick under the logic board, between the front-facing camera and the battery.
-	[* black] Slide the ~~guitar~~ pick toward the front-facing camera connector, and stop at the bend in the logic board.
+	[* black] Carefully insert an opening pick under the logic board, between the front-facing camera and the battery.
+	[* black] Slide the pick toward the front-facing camera connector, and stop at the bend in the logic board.