Изменения в этом шаге
Отредактированно Walter Galan -
Правка одобрена автор Walter Galan
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_note] In some kits, the 04 strip may be split into a 4R, to be placed on the right half of the display, and a 4L to be placed on the left half. |
| + | [* black] Remove the leftmost backing of the strip labeled 04 and align it with the bottom left edge of the rear enclosure, about a 1/4 inch away from the edge of the display glass. |
| + | [* icon_note] Repeat the process for the longer, rightmost backing. |
| + | [* black] Smooth out the strip from the center to ensure a good seal with no bubbles or wrinkles. |