Возврат к шагу #1
Отредактированно Walter Galan -
Правка одобрена автор Walter Galan
- До
- После
- Без изменений
Шаг Линий
| [* black] Remove the following screws securing the logic board to the rear case: | |
| [* red] Two 2.4 mm standoff screws | |
| [* icon_note] Use a small flathead screwdriver to remove these standoff screws. | |
| - | [* orange] One 2.1 mm Phillips |
| + | [* orange] One 2.1 mm Phillips #00 screw |