Возврат к шагу #4
Отредактированно Brett Hartt -
- До
- После
- Без изменений
Шаг Линий
| [* black] Using a spudger or fingernail, lift the clear blue tab away from the connector. | |
| [* black] Slide the locking tab on the power switch board cable connector toward the top of the console. | |
| - | [* icon_note] The locking tab will only move about |
| + | [* icon_note] The locking tab will only move about 2 mm. |
| [* black] Pull the power switch cable straight out of the connector. | |
| - | [* |
| + | [* black] The front panel is now free of the rest of the console. |