Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] PlaceWhile holding the glass up with the suction cup, slide the point of an opening pick ininto the gap opened bybetween the suction cupglass and body of the iPad.
[* black] PlaceWhile holding the glass up with the suction cup, slide the point of an opening pick ininto the gap opened bybetween the suction cupglass and body of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.
[* black] Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.