Перейти к основному содержанию
/
Мой рабочий стол для верстки руководств

Получите быстрый доступ к руководствам, запчастям и ответам касательно ваших устройств

Возврат к шагу #22

Отредактированно Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

-[* black] With the adhesive loosened, you can now insert the pick near the right-hand corner.
- [* icon_caution] Just like with the left antenna, only slide from the outer edge toward the center. Reversing this direction may damage the antenna.
+[* black] Insert the tip of one last pick next to the previous step's pick, and slide it beneath the home button.
+[* icon_caution] Stop about an inch from the right-hand side to avoid cutting the digitizer cable.
+[* black] Insert the pick slightly deeper and work it back toward the home button.
+[* icon_caution] Again, be sure to only slide the pick toward the center of the iPad when it is fully inserted; otherwise you may damage the antenna beneath the glass.