Возврат к шагу #3
Отредактированно Tim Osborn -
Правка отклонена автор Scott Havard
- До
- После
- Без изменений
Шаг Линий
| [* black] Use the flat tip of a spudger to gently lift the battery connector up off its socket on the logic board. | |
| [* icon_caution] Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely. | |
| + | [* icon_caution] The battery connector must be disconnected before you disconnect the LCD cable in the next step or you run a great chance of blowing the backlight fuse. |