Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Herbert Schröder -

Правка отклонена автор Jake Devincenzi

До
После
Без изменений

Шаг Линий

[* black] UseRemove the edge of an iPod opening tool to pry the thin coppersteel cover up from the rear-facing camera.
[* black] UseRemove the edge of an iPod opening tool to pry the thin coppersteel cover up from the rear-facing camera.
[* icon_note] Note the small spring located near the bezel next to the camera (highlighted in yellow).
[* black] Removeicon_caution] Use the steeledge of an iPod opening tool to pry the thin copper cover up from the iPod.rear-facing camera. Be carefull as it is connected to the steel mid plane and very fragile
[* black] Removeicon_caution] Use the steeledge of an iPod opening tool to pry the thin copper cover up from the iPod.rear-facing camera. Be carefull as it is connected to the steel mid plane and very fragile