Возврат к шагу #3
Отредактированно Adam O'Camb -
Правка одобрена автор Adam O'Camb
- До
- После
- Без изменений
Шаг Линий
| [* black] Slide the pick down the edge of the display to separate the adhesive underneath. | |
| [* black] Stop cutting when you get to the daughterboard to avoid the delicate capacitive button under the display. | |
| - | [* icon_note] If cutting becomes difficult, reheat and reapply the iOpener. |
| + | [* icon_note] If cutting becomes difficult at any point, reheat and reapply the iOpener. |
| [* black] After cutting the adhesive, leave the pick in the side of the display to prevent the display from re-adhering to the frame. |