Возврат к шагу #29
Отредактированно Jeff Suovanen -
Правка одобрена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Insert a battery isolation pick between the battery terminals and the contacts on the logic board. |
|---|---|
| + | [* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery. |
| + | [* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work. |