Возврат к шагу #2
Отредактированно Jeff Suovanen -
Правка одобрена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
| [* black] Remove the Home Button bracket and peel up the tape connected to it. | |
| + | [* icon_reminder] During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it |
| + | [* black] Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol. |
| + | [* black] Secure the bracket with hot-melt glue, superglue, or [product|IF317-072-1|high-strength double-sided tape]. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed. |