Возврат к шагу #1
Отредактированно Dante Mazzanti -
Правка одобрена автор Dante Mazzanti
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Remove the following |
|---|---|
| - | [* red] Three 1.3 mm Phillips |
| - | [* orange] One 1.6 mm Phillips |
| - | [* yellow] One 3.0 mm Phillips |
| + | [* black] Remove the following screws: |
| + | [* red] Three 1.3 mm Phillips screws |
| + | [* orange] One 1.6 mm Phillips screw |
| + | [* yellow] One 3.0 mm Phillips screw |
| [* icon_caution] It's very important that the one 3.0 mm screw goes in the top-right corner of the bracket. Anywhere else may cause damage to the logic board. |