Возврат к шагу #6
Отредактированно Tatiana Schneider -
Правка одобрена автор Tatiana Schneider
- До
- После
- Без изменений
Шаг Линий
| [* icon_note] The middle of the ribbon will be glued down to the device. | |
| - | [* black] |
| + | [* black] Place iOpener in microwave for one minute to heat. |
| [* black] Once heated, place iOpener vertically on top of ribbon cable. Let sit for one minute. | |
| [* black] Remove iOpener. | |
| - | [* black] Using tweezers, pinch ribbon cable in the middle and pull up firmly to detach from device but do not rip off. |
| + | [* black] Using wide nosed tweezers, pinch ribbon cable in the middle and pull up firmly to detach from device but do not rip off. |