Возврат к шагу #2
Отредактированно Walter Galan -
Правка одобрена автор Walter Galan
- До
- После
- Без изменений
Шаг Линий
| [* black] Use the edge of a plastic opening tool to carefully pry the dock connector cable's connector up from its socket on the logic board. | |
| - | [* black] Peel the dock connector ribbon cable off the rear |
| - | [* icon_caution] Do not try to completely remove the cable, as it is still securely attached to the rear |
| + | [* black] Peel the dock connector ribbon cable off the rear case. |
| + | [* icon_caution] Do not try to completely remove the cable, as it is still securely attached to the rear case. |