Возврат к шагу #3
Отредактированно Andrew Bookholt -
- До
- После
- Без изменений
Шаг Линий
| + | [* black] Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board. |
|---|---|
| + | [* black] Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable. |
| + | [* black] Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink. |
Изображение 1
Нет предыдущего изображения
Добавлено