Возврат к шагу #3
Отредактированно Kristen Gismondi -
Правка одобрена автор Kristen Gismondi
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Separate the battery from the chassis by sliding the spudger under the battery along the 3 glue strips. The glue needs to be gradually separated. The battery will lift free once the glue has been separated. |
|---|---|
| + | [* black] Separate the battery from the chassis by sliding the nylon spudger under the battery along the 3 glue strips. The glue needs to be gradually separated. The battery will lift free once the glue has been separated. |
| [* icon_note] There are 3 glue strips holding the battery to the chassis: One under the blue ribbon cable, one under the center of the battery, and one under the battery by the plug. | |
| [* icon_caution] While slight deformation is normal, do not overly bend the battery. | |
| [* icon_caution] The glue needs to be gradually separated. Slow, persistent work with the spudger will be effective but can take an extended period of time. | |
| - | [* icon_caution] Slide the spudger under the battery, but do not pry it up. |