Возврат к шагу #1
Отредактированно silas -
Правка отклонена автор Carsten Frauenheim
- До
- После
- Без изменений
Шаг Линий
| [* black] Remove the four Y000 screws securing the bracket over the home/Touch ID sensor: | |
| [* red] One 1.1 mm screw | |
| [* orange] Three 1.3 mm screws | |
| + | [* icon_reminder] These screws can be challenging to remove. If a screw is not loosening, apply more pressure and try again. This will prevent damage to the screw head. |
| [* icon_reminder] During reassembly, be careful not to overtighten these screws, or your home button may not work. |