Перейти к основному содержанию

Возврат к шагу #7

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Remove the following screws from the headphone jack assembly:
- [* red] 5x 2.6 mm Phillips #0
- [* orange] 2x 2.2 mm Wide Head Phillips #00
- [* yellow] 2x 2.6 mm Phillips #00
- [* icon_caution] These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid striping the screw.
+ [* red] Five 2.6 mm Phillips #0
+ [* orange] Two 2.2 mm Wide Head Phillips #00
+ [* yellow] Two 2.6 mm Phillips #00
+[* icon_note] These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid striping the screw.