Изменения в этом шаге
Отредактированно Sam Goldheart -
Правка одобрена автор Sam Goldheart
- До
- После
- Без изменений
Шаг Линий
| + | [* icon_note] The fingerprint sensor cable connects the phone to the rear glass near the main camera camera. The connector should disconnect as the rear glass is removed. As you lift the glass, peek in to be sure the orange cable has disconnected. |
|---|---|
| [* black] Use the opening picks to slice through any remaining adhesive and open the phone slightly. | |
| - | [* black] Lift the rear glass up slowly and be sure the fingerprint sensor cable is safely disconnected, this should happen automatically when the glass is removed. |
| [* icon_caution] If the fingerprint sensor cable seems snagged or stays taught do not open the phone any further. Disconnect the cconnector with the point of a spudger before proceeding. | |
| + | [* black] Remove the glass from the phone. |