Изменения в этом шаге
Отредактированно Sam Goldheart -
Правка одобрена автор Sam Goldheart
- До
- После
- Без изменений
Шаг Линий
| [* black] Before replacing your rear glass you will need to remove the old adhesive from the rear panel. | |
| - | [* black] If the fingerprint sensor adhesive is intact, it may be reused, but if damaged at all you should remove the old adhesive and |
| - | [* black] After removing old adhesive, clean the |
| + | [* black] If the fingerprint sensor adhesive is intact, it may be reused, but if damaged at all you should remove the old adhesive and apply replacements. |
| + | [* black] After removing old adhesive, clean the edges of the phone body and fingerprint sensor with high concentration isopropyl alcohol (at least 90%), then apply the new adhesive. |