Возврат к шагу #12
Отредактированно CGG -
Правка одобрена автор Clay Eickemeyer
- До
- После
- Без изменений
Шаг Линий
| [* black] Use a thin pry tool or tweezers to carefully pry up and disconnect the two coaxial cable connectors from the logic board. | |
| [* icon_reminder] During reassembly, these can be tricky to reconnect. One at a time, hold each connector in place over its socket and press down with the flat of your spudger. The connector should snap into place. | |
| + | [* icon_reminder] The top coax (nearest the battery connector) leads to the WiFi Diversity Antenna on the speaker assembly. The other coax is for the secondary cell antenna, part of the lightning assembly. Be sure to reassemble them to the right sockets |