Возврат к шагу #14
Отредактированно Steve -
Правка отклонена автор Adam O'Camb
- До
- После
- Без изменений
Шаг Линий
| [* black] Remove the seven screws securing the logic board: | |
| [* red] One 1.3 mm Phillips screw | |
| [* orange] Two 2.1 mm standoff screws | |
| - | [* yellow] Two 2.0 mm standoff screws |
| + | [* yellow] Two 2.0 mm standoff screws (the one closer to the power button is non-ferrous) |
| [* green] Two 2.2 mm standoff screws | |
| [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true]. | |
| [* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components. |