История шагов iMac Intel 21.5" Retina 4K Display (2017) Adhesive Strips Replacement

	[* icon_caution] Before you start placing strips, remove all of the old adhesive around the perimeter of the rear enclosure.
	[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display.
-	[* black] Use a pair of tweezers to grasp and peel up the edge of each adhesive strip.
-	[* icon_reminder] Repeat this process as necessary to remove all of the old adhesive.
-	[* icon_note] If necessary, use a spudger to scrape up the remaining adhesive, then peel with your fingers.
+	[* black] Use a pair of tweezers to grasp and peel up each strip of adhesive—or if necessary, use a spudger to scrape up the adhesive, and peel with your fingers.
+	[* icon_reminder] Repeat this process as necessary to remove all of the old adhesive.
+	[* black] For best results, after all the adhesive is removed, carefully clean the area under the adhesive with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.
+	[* icon_note] This helps prep the surface so that the new adhesive bonds properly (and your display won't fall out).