Возврат к шагу #2
Отредактированно johnsawyercjs -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board. |
|---|---|
| + | [* black] Use the tip of a spudger to push the camera cable's plug toward the fan and out of its socket on the logic board. |
| + | [* icon_note] If the camera cable's plug won't come easily out of its socket on the logic board, fold back the rubber cover over the fan to gain access to the cable, then gently pull on the cable while using the spudger to gently push the plug out of its socket. |
| + | [* icon_note] If the plug won't easily come out of its socket when you push it with the spudger while pulling the cable towards the fan, you may find it easier to use a pair of tweezers or small needlenose pliers to lightly grip the two "wings" of the plug and then pull it out of its socket, while also pulling on the cable. |
| [* icon_caution] Be sure to push parallel to the board, first on one side, then the other, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket. |