Возврат к шагу #11
Отредактированно Julian Bastmeijer -
Правка отклонена автор Jeff Suovanen
- До
- После
- Без изменений
Шаг Линий
| [* black] Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro. | |
| - | [* black] Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board. |
| + | [* black] Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board. Note: there is a small "lock" on the connector that you need to push using the point of the spudger, in order to disassemble the connector. |
| [* icon_reminder] When reinstalling the logic board, check the cables at the marked locations to make sure they don't get pinned underneath the logic board. | |
| [* red] Clockwise from top: keyboard, trackpad, battery, right speaker, keyboard backlight, display, microphone, headphone jack, left speaker. |