Перейти к основному содержанию
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

When the adhesive has been separated on all three sides properly you will be able to slowly lift the back cover.

Don't force it open. Use an iOpener to again soften the adhesive if the back cover won't come off or starts to bend.

Pay attention to the fingerprint sensor connector when flipping the back cover open. You might need to disconnect it as described in the next step.

Ваш вклад лицензируется под свободной лицензией Creative Commons.