Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a Phillips #1 screwdriver to remove the twelve 6-mm screws that borders the bottom of the laptop.

Start with the three screws on the top right corner and work clockwise. This will minimize the chances missing some of the screws.

Use a Phillips #1 screwdriver to remove a 6-mm screw that is located in the lower middle, as shown.

Use a Phillips #1 screwdriver to remove the three 3-mm screws located in the battery bay.

Use a Phillips #1 screwdriver to remove the one 4-mm screw located near the RAM.

Ваш вклад лицензируется под свободной лицензией Creative Commons.