Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

This step is only required if you have an anti-glare display. If you have a glossy display, skip to step 12.

Disconnect the Bluetooth cable by pulling the male end straight away from its socket.

Pull the connector parallel to the face of the logic board, not straight up.

Use the flat end of a spudger to pry the Bluetooth antenna cable from its socket on the board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.