Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 24 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socket.

De-route the cable from the gap between the hard drive and logic board.

If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.

Ваш вклад лицензируется под свободной лицензией Creative Commons.