Skip to main content
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to pop the I/O board connector straight up off its socket on the I/O board.

Be careful to only pry up on the cable connector, not on the socket itself or you risk damaging your I/O board.

Push the I/O board cable up to bend it out of the way.

Ваш вклад лицензируется под свободной лицензией Creative Commons.