Перейти к основному содержанию
Помощь
Редактирование шага 9 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Repeat this procedure with the adjacent battery cell:

Apply a small amount of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.

Alternatively, re-heat this section with your iOpener if needed.

Push a plastic card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive.

Ваш вклад лицензируется под свободной лицензией Creative Commons.