Перейти к основному содержанию
Помощь
Редактирование шага 9 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Lift the front panel out of the inner case, minding the cable still routed through the bottom of the Evo.

Carefully de-route the front panel ribbon cable through the slot in the inner case.

Remove the front panel.

Notice the four (4) clear plastic hooks that are adhered behind the menu buttons. Look closely. Each one is shaped differently and in a particular orientation.

If the replacement front panel does not have these installed already, carefully remove and transfer them from the old panel to the replacement.

Ваш вклад лицензируется под свободной лицензией Creative Commons.