Перейти к основному содержанию
Помощь
Редактирование шага 31 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

Carefully insert an opening pick under the ribbon cable near the Lighting connector housing.

Slide the opening pick toward the logic board, but stop half an inch from the bend in the cable.

Continuing farther along the ribbon cable risks cutting it.

Ваш вклад лицензируется под свободной лицензией Creative Commons.