Перейти к основному содержанию
Редактирование шага 32 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Reinsert the opening pick under the Lightning connector ribbon cable from the case-side edge.

Slide the pick along the Lightning connector ribbon cable and under the logic board.

Move slowly and carefully. If the opening pick does not slide easily, apply more heat and try again. If you use excessive force, you will likely slip and sever the Lightning connector cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons.