Skip to main content
Помощь
Редактирование шага 10 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use your thumbs to push the IR sensor connector toward the top edge of the iMac and out of its socket on the logic board.

Pull the IR sensor board up from behind the front face of the outer case.

Remove the IR sensor and set it aside.

Ваш вклад лицензируется под свободной лицензией Creative Commons.